|
Permit Holder
3 inch tall
various widths Great for bumper stickers, beach permits, boat dock permits,
parking permits Held in place using your license plate screws
|
|
Designed for stickers 3 inches tall and between 2.5 and 7 inches wide
|
The vehicle permit holder is designed to mount the permit to your car safely and securely, without damaging the paint or bumper. It is made of a durable weather-resistant metal alloy.
Patented Design |
Available in a several of sizes:
Small Rectangle 3 inch tall Adjustable from 2.5 to 4 inches wide Large Rectangle 3 inch tall Adjustable from 5.5 to 7 inch wide |
Order - Price $25 |
Common question: if I have a 3 inch square sticker, will it work? Yes, select the size 2.5 to 4 inch wide adjustable. When you install it, you can adjust how far the holder extends beyond the license plate so that only the 3 inches of the sticker will show.
The holder is designed to be slightly larger than the sticker, by just a millimeter or two around the edges. This provides a little flexibility in getting the sticker aligned while limiting the metal from showing. Depending on the tolerances of the sticker you are applying, you may see more or less around the edges. The width is fully variable within the specifications listed for the small or the large rectangle.
The holder is designed to be slightly larger than the sticker, by just a millimeter or two around the edges. This provides a little flexibility in getting the sticker aligned while limiting the metal from showing. Depending on the tolerances of the sticker you are applying, you may see more or less around the edges. The width is fully variable within the specifications listed for the small or the large rectangle.
|
|
Simple Installation
|
Testimonials
|
I love it! Game changer. Thank you so much.
Eric - Tesla, Gaithersburg, MD The plate works great! Thank you! The directions were very clear and easy to follow. Aimee - Tesla, Frederick, MD I followed the directions exactly and I thought they were perfect! They were very clear and easy to follow. It was easy to install and it looks great! It looks awesome and I’m so thankful not to have it stuck to the car. Creating the holder was such a good idea! Tracie, Chrysler Pacifica Hybrid |
I’ve bought two of these for my two cars so far. Super quick to ship, consistent quality, and they do the job nicely. Looks great, and is a much better alternative to applying the sticker directly to the paint.
Etsy 5 out of 5 stars - Frank, Tesla Model Y Simple yet just what I needed! Perfectly keeping the sticker off the paint! Etsy 5 out of 5 stars - Harold, Tesla Model X I received the HOV sticker mount (it looks great!) This is very helpful. Thanks for the great product and service! Kate, Mustang Mach-E |
FAQ's
Q: How does the holder attach to the car?
A: The permit holder is designed to attach using the license plate screws already a part of the car and extends out beside the license plate. No additional parts are needed and the only tool needed is a screwdriver.
Q: How sturdy is the permit holder?
A: The holder is made of a weather-resistant metal alloy designed to hold up to wear and tear.
Q: Will it scratch the paint?
A: Properly installed, the holder does not come in contact with the paint and will not damage the car. It hovers just a slight distance away from the actual bumper. Some users mentioned they added a felt or silicone bumper to the back, like the kind you use on cabinet doors, if their license plate frame is pushing the holder closer to the car.
Q: How does it compare to the plastic DIY's?
A: This holder is a patented design proven to work with the EV cars listed, and hold up to regular use. It is not brittle and does not deteriorate in the sun and weather changes.
Q: What is the size of the holder? Are there more sizes available?
A: The holder is sized to be slightly larger than the sticker, by about 1 to 2 millimeters on each side. A variety of sizes are available, with more being added: 3.5 inch round, 5 inch round, 4 1/8 inch square, 3 inch square, 3 by 6 rectangle (for bumper stickers). Custom sizes can be made.
Q: Can it be installed on either the right side or left side of the license plate?
A: Yes! You can install it on either side of the license plate - the left side or the right side. In fact, you can install one on each side of the license plate if you have multiple permits to display (HOV, Apartment, Parking, etc).
Q: Does it come with a license plate frame, like the Tesla frame in the picture?
A: No, it does not include a license plate frame. The holder is separate from the frame. Frames are a personal choice of the driver, so I designed it to work with all kinds of frames and it fits either behind the frame or, if the frame has tabs on the back, it slides into the tabs.
Q: Will it work with all makes of cars?
A: No. Your car needs to have the space to either (or both) sides of the license plate for the size of the sticker. The holder is designed to be slightly larger than the sticker size to give you a little leeway when sticking it to the holder, only by about 1-2 millimeters on each side.
Q: Is the permit holder removable? Can someone steal it?
A: To remove the holder, you have to remove the license plate from the car, which deters theft. Once the actual permit sticker is affixed to the holder, the sticker is permanently affixed to the holder, but the holder itself is not permanently attached to the car.
Q: When will the order ship?
A: Orders usually ship within 3 - 5 business days. During PayPal checkout, you can choose your shipping method. If you choose Standard Domestic it will ship USPS First Class with Tracking arriving in 3 to 5 days, Priority will ship USPS Priority Mail arriving in 1 to 2 days, and Ground will ship UPS Ground arriving in 1 day to most locations in Maryland. If you are near Historical Ellicott City, you can arrange for pickup, just email support@vehiclepermitholder.com to coordinate. Be aware that with COVID and higher than normal shipping volumes, the amount of time to receive your order may be longer than usual. You will receive a tracking number when it is shipped and you can track the package. Once delivered to USPS or UPS, we do not have any control over the delivery.
Q: How much will the shipping cost?
A: Shipping is calculated based on weight and destination zip code per USPS. Most shipments to US Domestic addresses cost approximately $3.80 to $4.25 for one holder for USPS First Class Package with Tracking. The shipping cost will show during the PayPal checkout process.
Q: Why do we ask if your license plate uses all 4 screws or just the top 2 screws?
If holder is held in place by the screws that mount your license plate to your car. If your car only uses the top two screws to mount the holder, included will be a piece of Gorilla Glue industrial outdoor double-sided tape to optionally use in lieu of the bottom plate screw to mount the holder to the plate (not to the car!). It is optional and can be attached later.
Q: What if I have other questions about the holder?
Please email support@vehiclepermitholder.com with any questions.
A: The permit holder is designed to attach using the license plate screws already a part of the car and extends out beside the license plate. No additional parts are needed and the only tool needed is a screwdriver.
Q: How sturdy is the permit holder?
A: The holder is made of a weather-resistant metal alloy designed to hold up to wear and tear.
Q: Will it scratch the paint?
A: Properly installed, the holder does not come in contact with the paint and will not damage the car. It hovers just a slight distance away from the actual bumper. Some users mentioned they added a felt or silicone bumper to the back, like the kind you use on cabinet doors, if their license plate frame is pushing the holder closer to the car.
Q: How does it compare to the plastic DIY's?
A: This holder is a patented design proven to work with the EV cars listed, and hold up to regular use. It is not brittle and does not deteriorate in the sun and weather changes.
Q: What is the size of the holder? Are there more sizes available?
A: The holder is sized to be slightly larger than the sticker, by about 1 to 2 millimeters on each side. A variety of sizes are available, with more being added: 3.5 inch round, 5 inch round, 4 1/8 inch square, 3 inch square, 3 by 6 rectangle (for bumper stickers). Custom sizes can be made.
Q: Can it be installed on either the right side or left side of the license plate?
A: Yes! You can install it on either side of the license plate - the left side or the right side. In fact, you can install one on each side of the license plate if you have multiple permits to display (HOV, Apartment, Parking, etc).
Q: Does it come with a license plate frame, like the Tesla frame in the picture?
A: No, it does not include a license plate frame. The holder is separate from the frame. Frames are a personal choice of the driver, so I designed it to work with all kinds of frames and it fits either behind the frame or, if the frame has tabs on the back, it slides into the tabs.
Q: Will it work with all makes of cars?
A: No. Your car needs to have the space to either (or both) sides of the license plate for the size of the sticker. The holder is designed to be slightly larger than the sticker size to give you a little leeway when sticking it to the holder, only by about 1-2 millimeters on each side.
Q: Is the permit holder removable? Can someone steal it?
A: To remove the holder, you have to remove the license plate from the car, which deters theft. Once the actual permit sticker is affixed to the holder, the sticker is permanently affixed to the holder, but the holder itself is not permanently attached to the car.
Q: When will the order ship?
A: Orders usually ship within 3 - 5 business days. During PayPal checkout, you can choose your shipping method. If you choose Standard Domestic it will ship USPS First Class with Tracking arriving in 3 to 5 days, Priority will ship USPS Priority Mail arriving in 1 to 2 days, and Ground will ship UPS Ground arriving in 1 day to most locations in Maryland. If you are near Historical Ellicott City, you can arrange for pickup, just email support@vehiclepermitholder.com to coordinate. Be aware that with COVID and higher than normal shipping volumes, the amount of time to receive your order may be longer than usual. You will receive a tracking number when it is shipped and you can track the package. Once delivered to USPS or UPS, we do not have any control over the delivery.
Q: How much will the shipping cost?
A: Shipping is calculated based on weight and destination zip code per USPS. Most shipments to US Domestic addresses cost approximately $3.80 to $4.25 for one holder for USPS First Class Package with Tracking. The shipping cost will show during the PayPal checkout process.
Q: Why do we ask if your license plate uses all 4 screws or just the top 2 screws?
If holder is held in place by the screws that mount your license plate to your car. If your car only uses the top two screws to mount the holder, included will be a piece of Gorilla Glue industrial outdoor double-sided tape to optionally use in lieu of the bottom plate screw to mount the holder to the plate (not to the car!). It is optional and can be attached later.
Q: What if I have other questions about the holder?
Please email support@vehiclepermitholder.com with any questions.